|
 The
HD Series High Impact Domes are hammer tough, weathertight, and input
power protected. The exterior, is comprised of a thick anodized CNC
machined aluminum base, an impact resistant polycarbonate dome, and an
anodized retaining ring that locks the dome in place while providing
continuous rigidity against impact forces. The interior incorporates a
voltage regulator board that allows 12 VDC or 24 VAC operation while
providing protection from over voltage, transient spikes and improper
electrical installations. Standard configuration includes an aluminum
color base, clear dome with black inner sleeve, and choice of black
and white or color camera.
The HD Series is
designed to mount over a single gang box to provide a flush appearance
while leaving room inside the electrical box for installing
modulators, power supplies, telemetry or video storage devices. The
impact resistant dome can also be surface installed in minutes to all
interior and exterior walls and ceilings.
A patent (pending) gimbal device allows
full rotation of the CCD camera head for positioning in any direction.
| |
Applications: |
| |
|
• Schools / Prisons |
| |
|
• Access Control |
| |
|
• Home Automation |
| |
|
• Transit Vehicles |
| |
|
• Industrial
Buildings |
| |
|
• Public Buildings |
| |
|
• Indoor / Outdoor |
|
| |
Features |
| |
|
• Weather and impact
protected housing |
| |
|
• Vandal resistant /
Hammer tested |
| |
|
• Rustproof anodized
aluminum base |
| |
|
• Silver finish
base / clear dome with black inner
sleeve |
| |
|
• Universal 180°
camera rotation |
| |
|
• B&W or color |
| |
|
• Compact at only
4.6" diameter |
| |
|
• Neoprene backing /
Dustproof |
| |
|
• 12VDC or 24VAC
operation |
| |
|
• 3-year warranty |
|
|
| Below
and left: The HD Series is based on a tough vandal resistant
design comprising of a polycarbonate dome and anodized CNC
machined base. The HD Series is extremely versatile for indoor and
outdoor installations in vandal prone locations. It can also fit over
a single gang electrical box for integration with cable television
modulators and other electronic options. The HD Series is
available in B&W and DSP color.
|
|
|
|
|
|
|
HD Specifications |
|
Model |
Color DSP |
B&W |
|
TV System |
NTSC |
EIA |
|
Image Sensor |
1/3" CCD Color DSP
Image Sensor |
1/3" CCD Sony
Image Sensor |
|
Video Signal Output |
1 V p-p, 75 ohm |
1 V p-p, 75 ohm |
|
CCD Effective Pixels |
512 (H) x 492 (V) –
NTSC |
510 (H) x 492 (V) |
|
Sync. System |
Internal |
Internal |
|
Min. Illumination |
6 lux @ F2.0 |
0.1 lux @ F2.0 |
|
Resolution |
330 TV lines |
420 TV Lines |
|
S/N Ratio |
>46 dB |
>50 dB |
|
Electronic Shutter |
1/60 to 1/100,000 |
1/60 to 1/100,000 |
|
Gamma Correction |
0.45 |
0.45 |
|
Backlight Compensation |
Automatic |
Manual Switch |
|
Gain Control |
AGC |
AGC |
|
Operational Range |
-40°C to +50°C
(-40°F
to 122°F) |
-40°C to +50°C
(-40°F
to 122°F) |
|
Humidity Range |
Up to 85% relative
humidity |
Up to 95% relative
humidity |
|
Power Supply |
12VDC or 24VAC |
12VDC or 24VAC |
|
Power Draw |
220 mA (Max.) |
100 mA (Max.) |
|
Lens Options |
3.6, 6, 8, 12mm |
3.6, 6, 8, 12mm |
|
Dome |
Polycarbonate (clear
with inner sleeve) |
Polycarbonate (clear
with inner sleeve) |
|
Base / Ring |
CNC Aluminum Anodized
(6061 T6) |
CNC Aluminum Anodized
(6061 T6) |
|
Dimensions |
4.63" (118 mm) dia
/ 3.31" (76 mm) H |
4.63" (118 mm) dia
/ 3.31" (76 mm) H |
|
Weight |
1.0 lbs (454g) |
1.0 lbs (454g) |
|
|
|
| Model
Numbers: |
| Model |
Description |
| HDB4236AC |
B&W, 420 lines
— 3.6mm lens (70° FOV) |
| HDB4206AC |
B&W,
420 lines — 6mm lens (45° FOV) |
| HDB4208AC |
B&W, 420 lines
— 8mm lens (33° FOV) |
| HDB4212AC |
B&W,
420 lines — 12mm lens (23° FOV) |
 |
| HDC3336AC |
Col, 330 lines —
3.6mm lens (70° FOV) |
| HDC3306AC |
Col,
330 lines — 6mm lens (45° FOV) |
| HDC3308AC |
Col, 330 lines —
8mm lens (33° FOV) |
| HDC3312AC |
Col,
330 lines — 12mm lens (23° FOV) |
|
| 24 VAC
Plug-in Transformer: |
| PS2420 |
120 VAC to 24 VAC,
20VA, 60Hz |
|
|
|
|
Technology by Derwent
Extreme |
